Our Classic Fuel Injection systems are E10 fuel compatible
Fuel Injector Viton O-Rings
7.52mm ID x 3.53mm thick
Universal Fit for:
Bosch EV1 EV3 and EV6 Type Top Feed Fuel Injectors 0280 150 ***, 0280 155 ***
Siemens Type Injectors
Rochester Injectors
Pack Contents:
8 OEM grade replacement Viton o-rings for upper and lower sealing --- Services up to 4 injectors
These sized O rings are used on many different injectors with the common 14mm size ends whether from Bosch, Siemens, Marelli and others
( most are 14mm with a only a few being 11mm ends )
We cannot accept returns on these as it is easy to damage the seal face ( not always visable ) particularly if incorrectly installed or forced.
However as they are low cost it is not much of a cost issue if they do turn out to be the wrong type for your injectors
Fuel Injector O-ring Seal Kit for Bosch, Siemens Fuel Injectors Universal
- Brand: Bosch
- Product Code: inj-oringx8
- Availability: 9
Tags:
Fuel Injector O-ring Seal Kit for Bosch,
Siemens Fuel Injectors Universal
IMPORTANT INFORMATION RELATING TO OUR COMPLETE FUEL INJECTION VEHICLE KITS
These kits are only suitable for vehicles with a Negative Earth electrical system.
If your vehicle is the older Positive Earth then you must convert the vehicle to Negative Earth before fitment.
Many older vehicles have already been converted but if you need to convert this is normally a simple process often cost free.
The full vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.
This initial start file is simply provided as an aid for
engine starting, it should not be considered a suitable final
calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.
Our Classic Fuel Injection Kits are custom built to order and to the
customer general specification and as such are exempt from automatic
return rights under Consumer Contract regulations.
By ordering this
conversion kit you understand that further ECU calibration work will be
required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.