• Your shopping cart is empty!



Our Classic Fuel Injection systems are E10 fuel compatible



Jenvey Heritage DCOE Injector Throttle Body Master and Slave Bundle

2 x 40mm or 45mm Bodies ( 1 x Master Throttle Body and 1 x Slave Throttle Body )



Available with Standard or Primary Linkages

Standard Linkage ( interconnecting levers between bodies ) - will be supplied by default unless Primary Linkage is requested

Primary Linkage ( ball type for conrod links etc. ) - these are available if requested at time of order - make comment in checkout section



These bodies contain an inbuilt TPS sensor on the master and 4 x 350cc injectors

Being of the Heritage design these look virtually identical to the original Weber DCOE carburettors




This kit contains all the parts needed for our Classic Fuel Injection system
(you do not need to order anything else from our range )

This Premium kit will suit a vehicle with a pair of twin choke Weber 40's or 45's DCOE carburettor and includes the Jenvey 40 or 45 DCOE Throttle Body with full idle speed control capability

We have assembled this kit for easy ordering but if you prefer you can still order some or all of the parts using our individual listings

Ordering our kits will also save you money, our kits are typically 10 to 15% cheaper than ordering individual parts


This kit contains

Engine ECU -  MaxxECU MINI ECU
ECU software
ECU to Laptop communication lead

Engine Sensor Kit Comprising -
Throttle Position Sensor ( built into throttle body )
Coolant Temperature Sensor
Manifold Absolute Pressure Sensor
Distributor Sensor
Distributor Pickup ( you need to specify at time of ordering how many cylinders )
Ignition Amplifier
Idle Control Valve and pipework
Wide Band Oxygen Sensor Amplifier
Wide Band Bosch Oxygen Sensor
Weld On Oxygen Sensor Boss

Fuel System Kit Comprising -
High Pressure Fuel Pump
Fuel Pump Brackets
Inline Fuel Filter
Fuel Filter Bracket
Fuel Pressure Regulator
10m of High Pressure Fuel Hose
Fuel Hose Clamps

Fuel Injector Kit Comprising -
4 x Fuel Injectors built into throttle body
2 x Jenvey 40 or 45 DCOE HERITAGE Throttle Bodies to suit Weber 40 or 45 DCOE equipped vehicles ( 1 x Master and 1 x Slave )


Electrical Wiring
Plug and Play wiring loom ready to install

Please note this kit does not contain nuts, bolts and other fixings or adapters as they will be specific to your application but will easily be sourced from your normal suppliers or your existing workshop stock of parts.



Classic Fuel Injection - Complete Kit for Twin Jenvey 40 or 45mm HERITAGE DCOE - Select Options

  • £2,900.00

  • Ex Tax: £2,900.00

Available Options


Tags: Classic Fuel Injection - Complete Kit for Twin Jenvey 40 45 HERITAGE DCOE




IMPORTANT INFORMATION RELATING TO OUR COMPLETE FUEL INJECTION VEHICLE KITS

These kits are only suitable for vehicles with a Negative Earth electrical system.
If your vehicle is the older Positive Earth then you must convert the vehicle to Negative Earth before fitment.
Many older vehicles have already been converted but if you need to convert this is normally a simple process often cost free.


The full vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.

This initial start file is simply provided as an aid for engine starting, it should not be considered a suitable final calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.

Our Classic Fuel Injection Kits are custom built to order and to the customer general specification and as such are exempt from automatic return rights under Consumer Contract regulations.
By ordering this conversion kit you understand that further ECU calibration work will be required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.