Classic Fuel Injection
Walbro Fuel Injection High Pressure Pump
In-Tank Fuel Injection Pump Kit
Fittings In (mm):- 8mm
Fittings Out (mm):- 8mm
Pump:- Walbro GSL393
Voltage DC:- 12v
Flow Ltr/Hr (Max):- 220
Flow Ltr/Hr @ 3 Bar (44psi):- 186
Location To Tank (Mtrs) 0.6
Thread Size:- 10x1 sft
Suitable for many engines types and power outputs up to around 350 to 400 BHP
( Power figures are a guide only and not intended as an exact rating )
Please ensure that a pre-filter is fitted prior to installation to prevent contamination.
Classic Fuel Injection - Fuel Pump - High Pressure - 220 Ltr/Hr - FP601
- Brand: Walbro
- Product Code: CFI-FP601-A
- Availability: 100
IMPORTANT INFORMATION RELATING TO THE RETURN OF COMPLETE FUEL INJECTION VEHICLE KITS
The vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.
This initial start file is simply provided as an aid for
engine starting, it should not be considered a suitable final
calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.
Our Classic Fuel Injection Kits are custom built to order and to the customer general specification and as such are exempt from automatic return rights under Consumer Contract regulations.
By ordering this conversion kit you understand that further ECU calibration work will be required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.