Injector Technical Data
Classic Fuel Injection - Injector Technical Data
This data refers to the most common fuel injectors used within our kits.
It is believed to be accurate and has been sourced from around the internet but is supplied on an " AS IS " basis, it is your responsibility to determine through testing if this data is sufficient for your needs.
For our Deadtime tests we measured the fuel delivered at a 4ms pulse width for 2500 pulses with a simulated engine speed of 1500RPM and dervied the deadtime figure.
To validate the deadtime figure we repeated the test at a 2ms pulse width for 5000 pulses.
( for the deadtime variable to be considered accurate the fuel delivered must be identical for both the 4ms and 2ms test )
Classic Fuel Injection - " Bosch Black "
Part Number = Bosch 0280155884
Flow Rate = 190cc / 18lb per hour @ 3bar
Resistance = 14.5 ohm
Deadtime in mSec ( derived from our own flow test bench using our standard MaxxECU MINI and fuel system )
8 volt = 1.6, 10 volt = 1.10, 12 volt = 0.75, 14 volt = 0.55, 16 volt = 0.40
Classic Fuel Injection - " Bosch Red "
Part Number = Bosch 0280155759
Flow Rate = 339cc / 32lb per hour @ 3bar
Resistance = 16 ohm
Deadtime in mSec ( derived from our own flow test bench using our standard MaxxECU MINI and fuel system )
Classic Fuel Injection - " Bosch Green "
Part Number = Bosch 0280155968
Flow Rate = 440cc / 42lb per hour @ 3bar
Resistance = 12 ohm
Deadtime in mSec ( derived from our own flow test bench using our standard MaxxECU MINI and fuel system )
Classic Fuel Injection - " Siemens 60 "
Part Number = Siemens 107961
Flow Rate = 630cc / 60lb per hour @ 3bar
Resistance = 14.5 ohm
Deadtime in mSec ( derived from our own flow test bench using our standard MaxxECU MINI and fuel system )
Classic Fuel Injection - " Siemens 80 "
Part Number = Siemens 110324
Flow Rate = 875cc / 80lb per hour @ 3bar
Resistance = 14.5 ohm
Deadtime in mSec ( derived from our own flow test bench using our standard MaxxECU MINI and fuel system )