Our Classic Fuel Injection systems are E10 fuel compatible

Classic Fuel Injection
1 large rubber lined P Clips for fuel pump mounting to help prevent noise and vibration
Suitable for a pump with a diameter of around 55mm / 60mm - Sized to fit most pumps inconjunction with the sound deadening sleeve they often have

Most installations can use just one clip but you could use 2 clips per pump for maximum security if it is located in an exposed area

These clips are sold in packs of 1
( 1 pack required to mount 1 pump )

Classic Fuel Injection - Fuel Pump Mounting 1 x 60mm clamps

  • £2.50

  • Ex VAT: £2.50

Tags: Classic Fuel Injection - Fuel Pump Mounting 1 x 60mm clamps


These kits are only suitable for vehicles with a Negative Earth electrical system.
If your vehicle is the older Positive Earth then you must convert the vehicle to Negative Earth before fitment.
Many older vehicles have already been converted but if you need to convert this is normally a simple process often cost free.

The full vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.

This initial start file is simply provided as an aid for engine starting, it should not be considered a suitable final calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.

Our Classic Fuel Injection Kits are custom built to order and to the customer general specification and as such are exempt from automatic return rights under Consumer Contract regulations.
By ordering this conversion kit you understand that further ECU calibration work will be required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.