• Your shopping cart is empty!

Our Classic Fuel Injection systems are E10 fuel compatible



Classic Fuel Injection - Fuel Injection Conversion Thottle Body
Retroject - Injector mounting adaptor

This is a new adaptor to replace the Weber Downdraft DGV or DGAS carburettors

( The Retroject is a bolt on replacement to the Weber DCD, DGV, DGAV, DFEV, DGMAs and DGAS  and with a small modification to the fixing holes can also be used with the DMTL )

To suit
Weber DGV 32/36
Weber DGAS 38/38

Bolt spacing dimensions for flange to inlet manifold
4 bolts with spacing 93mm x 46mm approx

This is the Retroject adaptor designed and manufactured by Webcon.
We are authorised dealers for this part

This is a new replacement throttle body to replace the carburettor.
It is a direct bolt on part and all throttle linkages etc. are retained.
It looks very similar to the original carburettor so the original look of the vehicle is retained.
No non reversible engine modifications are needed.

This Weber Retroject assembly contains the Throttle body, 2 x Pico Fuel Injectors, Idle Speed control, Throttle Position Sensor and Air Temperature Sensor all inbuilt into one part.
Good for vehicles upto around 180 BHP

We will be expanding our range soon to design and produce adaptors to suit a wide range of vehicles, engines and carburettor types


Classic Fuel Injection - Weber Retroject Injector Throttle Body for DGV DGAS

  • Brand: Weber
  • Product Code: CFI-retroject
  • Availability: 100

  • £540.00


Tags: Classic Fuel Injection - Weber Retroject Injector Throttle Body for DGV DGAS - Fuel Injection Conversion Thottle Body




IMPORTANT INFORMATION RELATING TO THE RETURN OF COMPLETE FUEL INJECTION VEHICLE KITS

The vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.

This initial start file is simply provided as an aid for engine starting, it should not be considered a suitable final calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.

Our Classic Fuel Injection Kits are custom built to order and to the customer general specification and as such are exempt from automatic return rights under Consumer Contract regulations.
By ordering this conversion kit you understand that further ECU calibration work will be required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.