Our Classic Fuel Injection systems are E10 fuel compatible
VW Beetle- Classic Car Fuel Injection Conversion
( VW version with one twin choke carburettor on each bank with the twin port head )
Based on our Premium Vehicle Kit with 4 injectors to suit vehicles with a pair of Weber IDF twin choke downdraft carburettors upto 140 BHP
THE THROTTLE BODIES ARE NOT INCLUDED WITH THIS KIT -- IT IS ASSUMED CUSTOMER WILL SUPPLY
Depending on your air filters you are using you may find you need to use some spacers to lift your air filter assembly to clear the fuel rail and injectors. This varies by customer vehicle / air filter choice.
We have some 19mm thick spacers from Jenvey listed in the options section - add these to your order if you require
This kit contains
Engine ECU - Based on the MaxxECU MINI ECU
ECU software
ECU to Laptop communication lead
Engine Sensor Kit Comprising -
Throttle Position Sensor
Coolant Temperature Sensor
Manifold Absolute Pressure Sensor
Distributor Sensor
Distributor Pickup
Ignition Amplifier
Idle Control Valve and housing
Wide Band Oxygen Sensor Amplifier
Wide Band Bosch Oxygen Sensor
Weld On Oxygen Sensor Boss
Fuel System Kit Comprising -
High Pressure Fuel Pump
Fuel Pump Brackets
Inline Fuel Filter
Fuel Filter Bracket
Fuel Pressure Regulator
10m of High Pressure Fuel Hose
Fuel Hose Clamps
Fuel Injector Kit Comprising -
4 x Fuel Injectors for total engine power upto around 140 BHP ( Bosch 190CC )
2 x Fuel Injector High Mini Fuel Rails
2 x Weber type IDF 40MM type throttle bodies to replace the Weber or Empi carburettors - NOT INCLUDED WITH THIS KIT
4 x Hosetail Idle Air Hose Fittings
Electrical Wiring
Four injector universal wiring loom ready to install ( VW custom design )
Please note this kit does not contain nuts, bolts and other fixings or adapters as they will be specific to your application but will easily be sourced from your normal suppliers or your existing workshop stock of parts.
Classic Fuel Injection Conversion, VW Beetle, to suit Twin Jenvey IDF - CUSTOMER TO SUPPLY THROTTLE BODIES
-
£1,850.00
- Ex Tax: £1,850.00
Related Products
Replace your worn out SU or Stromberg carburettor with these throttle bodiesUsing our range of SF st..
£205.00
Ex Tax: £205.00
Replace your worn out SU or Stromberg carburettor with these throttle bodiesUsing our range of SF st..
£205.00
Ex Tax: £205.00
Classic Fuel Injection
Throttle Position Sensor ATP200 / Wabash 97
Used as an upgrade option on our ..
£77.00
Ex Tax: £77.00
Tags:
Classic Fuel Injection Conversion,
VW Beetle,
to suit Twin Jenvey IDF - CUSTOMER TO SUPPLY THROTTLE BODIES
IMPORTANT INFORMATION RELATING TO OUR COMPLETE FUEL INJECTION VEHICLE KITS
These kits are only suitable for vehicles with a Negative Earth electrical system.
If your vehicle is the older Positive Earth then you must convert the vehicle to Negative Earth before fitment.
Many older vehicles have already been converted but if you need to convert this is normally a simple process often cost free.
The full vehicle kits will normally be supplied with the ECU pre loaded with an initial start file.
This initial start file is simply provided as an aid for
engine starting, it should not be considered a suitable final
calibration for your engine.
You must be prepared to undertake further ECU calibration work to ensure the ECU files are tailored to your vehicle.
Failure to successfully complete the calibration process may lead to poor vehicle driveability or even damage to your engine.
Our Classic Fuel Injection Kits are custom built to order and to the
customer general specification and as such are exempt from automatic
return rights under Consumer Contract regulations.
By ordering this
conversion kit you understand that further ECU calibration work will be
required and the final results are outside of our control.
We cannot accept returns or claims arising from failure to successfully complete the calibration process.